Configurarcion SBox Nagra - GolTv - CCcam Cliente / Server
Para configurar nuestras tarjetas, necesitamos editar el fichero de configuracion: sbox.conf
Os dejo el fichero un poco mas ordenado y preparado para introducir los datos necesarios.
¿ Donde se añade la CAMID - RSA - BK de la tarjeta Nagra3 ?
# X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
¿ Donde se añade la CAMID - RSA de la tarjeta TIGER ( GolTV ) ?
¿ Como averiguar rapidamente tu CAMID de la tarjeta Nagra3 ?
Solo tienes que arrancar Sbox, y leer el principio del LOG, veras en una linea la palabra serial, el numero siguiente es el CAMID, luego un poco mas abajo veras que pone ppua, tambien sale hay el numero CAMID. Te dejo un ejemplo del log.
Gracias terrorman.
Para configurar nuestras tarjetas, necesitamos editar el fichero de configuracion: sbox.conf
Os dejo el fichero un poco mas ordenado y preparado para introducir los datos necesarios.
Código:
# ~~~~~~~~~~~~~~~~~~~~~ CONFIG GLOBAL ~~~~~~~~~~~~~~~~~~~~~ #
[main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.26.0.1:3354 # server ip:server port
userspath=/var/bin/users.sbox # users list
channelinfo=/var/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=admin:admin # user:pass for webinterface
webport=8080 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=1:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
# ~~~~~~~~~~~~~~~~~~~~~ NAGRA3 ~~~~~~~~~~~~~~~~~~~~~ #
# Nagra Tarjetero Config
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=500 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=0 # how many ecms can be cached, 0 or less=cache disabled
# Nagra Tarjeta Config
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa=0000000000000000000000000000 # rsa "n" from this card (like newcs)
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=0000000000000000000000000 # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
# ~~~~~~~~~~~~~~~~~~~~~ NAGRA3 TIGER ~~~~~~~~~~~~~~~~~~~~~ #
# Nagra Tiger Tarjetero Config
[slot1]
active=1 # 0=inactive 1=active
sci=/dev/sci1 # lower
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15051 # newcamd port
mhz=500 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=0
# Nagra Tiger/ncmed Tarjeta Config
[TIGER601] # nagra camid (4 bytes)
rsa=0000000000000000000000000000 # rsa "n" from this card (like newcs)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
# ~~~~~~~~~~~~~~~~~~~~~ SECA V10 ~~~~~~~~~~~~~~~~~~~~~ #
#Seca Example
#[CCCCCCCC] # seca camid (4 bytes)
#ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
#emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath= # path from port.list
#controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
# ~~~~~~~~~~~~~~~~~~~~~ VIACCESS ~~~~~~~~~~~~~~~~~~~~~ #
#Viaccess Example
#[CCCCCCCC] # via camid (4 bytes)
#emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath= # path from port.list
#aeskey= # aeskey used by nano d2, example: aeskey=01:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;09:BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
#controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid¿ Donde se añade la CAMID - RSA - BK de la tarjeta Nagra3 ?
Código:
# Nagra Tarjeta Config
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa=0000000000000000000000000000 # rsa "n" from this card (like newcs)
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=0000000000000000000000000 # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
controlsid=0:0¿ Donde se añade la CAMID - RSA de la tarjeta TIGER ( GolTV ) ?
Código:
# Nagra Tiger/ncmed Tarjeta Config
[TIGER601] # nagra camid (4 bytes)
rsa=0000000000000000000000000000 # rsa "n" from this card (like newcs)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid¿ Como averiguar rapidamente tu CAMID de la tarjeta Nagra3 ?
Solo tienes que arrancar Sbox, y leer el principio del LOG, veras en una linea la palabra serial, el numero siguiente es el CAMID, luego un poco mas abajo veras que pone ppua, tambien sale hay el numero CAMID. Te dejo un ejemplo del log.
Código:
22:45:02 sbox: Viewing Pay TV without a valid subscription is illegal
22:45:02 Wellcome to SBox (for MIPS)
22:45:02 sbox: checking for /usr/bin/sbox.conf... OK
22:45:02 io: sci device detected
22:45:04 reset: got atr on slot1
22:45:04 reset: atr 0000000000000000000000000000000000000000000000000000000
22:45:04 reset: hist 000000000000000000000000000000000
22:45:04 reset: char D N A S P 1 8 0 M e r J 0 2
22:45:04 reset: crl 0E
22:45:04 reset: working at 5.000Mhz (max 5.000Mhz)
22:45:04 sbox: nagra card init
22:45:04 nagra: serial 00000000 (0000000000)
22:45:04 nagra: provider 00, id 004001, ppua 00000000, caid 1810
22:45:04 nagra: provider 01, id 004101, ppua 00000000, caid 1810
22:45:04 nagra: card init okGracias terrorman.