Qué hay de nuevo

Ayuda con gbox

nico7

New member
Hola, haber si alguien me puede ayudar que estoy empezando a desesperarme.
Tengo vu + solo SE v2 con black hole 3.0.1. y gbox806.
Tengo un f 690 q hace de servidor en el salón y el vu+ en el dormitorio, asi que es red interna.
Tengo ip asignada a cada deco, puertos abiertos de cada uno , contraseña en Hexadecimal.
Atributos a los archivos 755.
Mi configuración es esta:

# allow maximum 06 share level for recieved card data
I: { 03 }


# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 01 03 1F 4000 6000 }


# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }


# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
#G: { 17020000 1234 }
#G: { 0B000000 ABCD }
#G: { 05021510 AB34 }
#G: { 0D03A000 A234 }



# For W: please read the cwshare.txt, here only some examples (max. 128 PID)
# use card 1 only for the following pids
#W: { 01 02 02 } 1022 100A 100B 102B 1009 101D 1029 1014 1011 101B
# don't use card 2 for the following pids
#W: { 02 03 03 } 1008 1016


# S: is the same as W:, just using the SID instead of the ECMPID (max. 128 SID)


# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
M: { 192.168.1.1xx { aabbccdd }}


#
# Internet Friends rx tx password cod
#D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}


#
# other local boxes
#D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
D: { 192.168.1.1xx { 25000 6666 { ccddaaff { 5 5 }}}}

Agradecería alguna ayudita.
Gracias de antemano y un saludo.
 
Última edición:
Arriba